Products
-
Car Audio
-
Cerwin Vega
-
Diaphragms
Always clean the gap before installing new diaphragm! See “FAQ- How To”.
MANY MORE MODELS AVAILABLE. CALL FOR INFO………-
18 Sound Diaphragms
-
Altec Diaphragms
-
B&C Diaphragms
-
B&W Diaphragms
-
Behringer Diaphragms
-
Celestion Diaphragms
-
Cerwin Vega
-
Dynacord Diaphragms
-
EAW Diaphragms
-
Electro Voice Diaphragms
-
Eminence Diaphagms
-
Fane Diaphragm
-
Foster Diaphragms
-
Gemini Diaphragms
-
Infinity Diaphragms
-
Jamo Diaphragms
-
JBL Diaphragms
-
Jensen Diaphragm
-
Klipsh Diaphragms
-
Mackie Diaphragms
-
McIntosh Diaphragms
-
OTHER -Misc Diaphragms
-
P Audio Diaphragm
-
Peavey Diaphragms
-
RCF Diaphragms
-
Renkus Heinz Diaphragms
-
Selenium Diaphragms
-
Tannoy Diaphragms
-
TOA Diaphragm
-
University Sound Diaphragms
-
VIFA Diaphragms
-
Wharfedale Diaphragms
-
Yamaha Diaphragms
-
Yorkville Diaphragms
-
-
Electronic Parts
-
Hardware
Many more options available. Contact us for other product info….. Cabinet Corners + Pole Mounts ….. Grills …… Handles ….. Jackplates + Terminals …. Ports
-
Horns, Drivers, Xovers
Compression Drivers, Horn Lens, Combo Horn/ Driver Assemblies, & Crossovers
-
Crossovers
We REPAIR Crossovers. We CUSTOM BUILD Crossovers.
All Eminence crossovers available. Other BRAND Crossovers also available.
-
-
Infinity
-
JBL
JBL takes its decades of experience making speakers and other equipment for concert halls and other public venues, and uses it to create audio equipment for consumers around the world. You can enjoy a movie, ball game or concert as part of a huge crowd or in your home – but either way, you can catch all of the sounds with superb clarity through JBL components.
-
Mid Range
You are not limited to one brand speaker if your component is no longer available.
Look at all the brand options that match your size requirements. -
Pro Audio
Guitar, Bass, PA, Monitor, Studio Speakers…………….
Low Frequency Drivers…. 3″-8″ Speakers ….. 10″ Speakers ….. 12″ Speakers… 15″ Speakers ….. 18″ Speakers …… Cabinets-
Pro Audio Cabinets
-
ProAudio Low Frequency
3″-8″ Speakers ….. 10″ Speakers ….. 12″ Speakers… 15″ Speakers ….. 18″ Speakers
-
-
Refoam Kits- Polyether
Foams available in KITS as singles or pairs or as Foams Only. Foams size changes may occur due to production run variations………
You can find Refoaming Instructions plus Other Answers at Refoaming FAQ….
Refoam Kits 3″-5″…… Refoam Kits 6″ – 8″ ….Refoam Kits 10″ ….Refoam Kits 11″ – 12″ ….. Refoam Kits 14″ -15″ …. Refoam Kits 18″-
Refoam kits 11" - 12"
(279.4 mm – 304.8 mm)………
How To Measure, Instructions + More -
Refoam Kits 14"-15"
(355.6mm – 381.0 mm)……….
How To Measure, Instructions + More -
Refoam Kits 18"
(457.2 mm)…………
How To Measure, Instructions + More -
Refoam Kits 3" - 5"
(76.2 mm – 127mm)………..
How To Measure, Instructions + More -
Refoam Kits 6" - 8"
(152.4 mm – 203.2mm)…………
How To Measure, Instructions + More -
Refoam Kits 9-10"
(228.6 mm – 254.0 mm)………..
How To Measure, Instructions + More
-
-
Speaker PARTS
Many Many MORE Options Available….. Check Out the HOW TO and FAQ………….
Adhesives and Doping ….. DIY Recone Kits (Most Brands) ….. Electro Voice DIY Recone Kits …. JBL Recone Kits …. Dustcaps ….. Gaskets ….. Passive Radiators-
Adhesives and Surround Doping & Dampener
-
DIY Recone Kits PARTS
Do-It-Yourself Recone kits come unassembled. In general, there is one voice coil, one spider, one cone w/ attached surround, one dustcap, one pair of leads, centering shims and one gasket or gasket set. Some speakers require two spiders or do not use a dustcap or a gasket. Sometimes parts must be modified.You might need to open a cone to the right vc size or adjust other parts to work in your application. Kits do not come with adhesives.
Go to FAQ- How To for Measuring and Repair Instructions-
Electro Voice DIY Recone Parts
You can order DIY Recone Kits or send your speaker to us for repair. Contact us for Spex repair pricing.
-
JBL Recone Kits
We are an authorized JBL Service Center. It is JBL’s policy to maintain quality by having all work performed by trained personnel. Many more model parts than visible here are Available.
Contact us if you need JBL Parts.
-
-
Dustcaps- (Center Dome)
-
Gaskets or Rings
Gaskets are sold Individually and not in Pairs.
-
Passive Radiator
-
-
Special Offers
Special WEB ONLY Pricing
Please check back with us often. We will be constantly changing our Daily, Weekly and Monthly Specials -
Stereo Cabinets
-
Tweeters
You are not limited to one brand speaker if your component is no longer available.
Look at all the brand options that match your size requirements. -
Woofers
You are not limited to one brand speaker if your component is no longer available.
Look at all the brand options that match your size requirements. ………………………. 3″ – 5.9″ Woofers …. 6″ – 8″ Woofers …. 10″ Woofers … 12″ Woofers … 15″ Woofers-
Woofers 10"
254.0 mm
-
Woofers 12"
304.8 mm
-
Woofers 15"
381.0 mm
-
Woofers 3"- 5.9"
76.2 mm – 149.86 mm
-
Woofers 6"- 8"
152.4 mm – 203.2 mm
-
| 1" Fusion Encounter Dome Tweeter |
|
$ 30.00 | ||
|
Sound Dispersing Tweeter Housing |
||||
| 10" Advent Refoam Kit SM- RFK ADV10 SM |
|
$ 22.00 | ||
|
RFK ADV10 SM Flat attach Foam Surrounds for Smaller Advent Woofer. This is not for the 12″ frame with the metal flange or the 12″ frame with the Masonite Gasket. FOAM: OD 8.938″ (227.025 mm) – ID 6.625″ (168.275 mm) ROLL: OD 8.5″ (215.900 m) – ID 7.0″ (177.80 mm) |
||||
| 10" CV style Refoam Kit Red Angle- RFK10 RED |
|
$ 28.00 | ||
|
RFK10 RED Flatish Angle Attach Foam- Cerwin Vega Style – Foam is red on top and bottom (unlike RFK12 Red which is red on top and gray on bottom) Kits come with Cerwin Vega logo dustcap. This foam fits 101W2, 102WT, 10W1, 10W2, 10W3, 250SE, 250-SE, AT10, AT-10 and many more. FOAM: OD 9.562″ (242.875 mm) – ID 7.06″ (179.40 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.562″ (192.074 mm) |
||||
| 10" CV style Refoam Kit Red Angle- RFK10 RED |
|
$ 28.00 | ||
|
RFK10 RED Flatish Angle Attach Foam- Cerwin Vega Style – Foam is red on top and bottom (unlike RFK12 Red which is red on top and gray on bottom) Kits come with Cerwin Vega logo dustcap. This foam fits 101W2, 102WT, 10W1, 10W2, 10W3, 250SE, 250-SE, AT10, AT-10 and many more. FOAM: OD 9.562″ (242.875 mm) – ID 7.06″ (179.40 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.562″ (192.074 mm) |
||||
| 10" Goldwood Poly Woofer 8 ohms |
|
$ 70.00 | ||
|
GW10D8 10″ Poly Mica cone, Butyl Rubber surround, Cast Aluminum frame, 40 oz magnet, 400 Watts mAX , 1.5″ vc, 8 ohms, 93 db, 25-3000 Hz |
||||
| 10" Goldwood Poly Woofer 8 ohms |
|
$ 70.00 | ||
|
GW10D8 10″ Poly Mica cone, Butyl Rubber surround, Cast Aluminum frame, 40 oz magnet, 400 Watts mAX , 1.5″ vc, 8 ohms, 93 db, 25-3000 Hz |
||||
| 10" Goldwood Woofer |
|
$ 95.00 | ||
|
GW-10120 500 Watts RMS/1000 Watts Max, 3″ VC, 8 Ohms, 50-4,000 Hz, gold-plated spring loaded terminals, cast aluminum frames support chrome-plated back plate and gray ribbed paper cone. Overall Diameter: 10-1/4″, Cutout Diameter: 9-1/4″, Mounting Depth: 4-1/2″ |
||||
| 10" Goldwood Woofer |
|
$ 95.00 | ||
|
GW-10120 500 Watts RMS/1000 Watts Max, 3″ VC, 8 Ohms, 50-4,000 Hz, gold-plated spring loaded terminals, cast aluminum frames support chrome-plated back plate and gray ribbed paper cone. Overall Diameter: 10-1/4″, Cutout Diameter: 9-1/4″, Mounting Depth: 4-1/2″ |
||||
| 10" Goldwood Woofer 4 ohms |
|
$ 70.00 | ||
|
GW10D4 10″ Poly Mica cone, Butyl Rubber surround, Cast Aluminum frame, 40 oz magnet, 400 Watts Max, 1.5″ vc, 4 ohms, 93 db, 25-3000 Hz |
||||
| 10" Goldwood Woofer 4 ohms |
|
$ 70.00 | ||
|
GW10D4 10″ Poly Mica cone, Butyl Rubber surround, Cast Aluminum frame, 40 oz magnet, 400 Watts Max, 1.5″ vc, 4 ohms, 93 db, 25-3000 Hz |
||||
| 10" Infinity Bullet Center Refoam Kit Flangle - RFK10 INFIN |
|
$ 30.00 | ||
|
RFK10 INFIN BULLET Foam for Infinity with Flatish Angle Attach with a Bullet Dust Cap only – no dustcaps or shims needed. Do Not Remove Center “Bullet” (see picture for example). Recenter new foam by eye, ear and feel FOAM: OD 9.625″ (244.475 mm) – ID 6.813″ (173.05 mm) ROLL: OD 8.875″ )225.425 mm) – ID 7.438″ (188.925 mm)
|
||||
| 10" Infinity Bullet Center Refoam Kit Flangle - RFK10 INFIN |
|
$ 30.00 | ||
|
RFK10 INFIN BULLET Foam for Infinity with Flatish Angle Attach with a Bullet Dust Cap only – no dustcaps or shims needed. Do Not Remove Center “Bullet” (see picture for example). Recenter new foam by eye, ear and feel FOAM: OD 9.625″ (244.475 mm) – ID 6.813″ (173.05 mm) ROLL: OD 8.875″ )225.425 mm) – ID 7.438″ (188.925 mm)
|
||||
| 10" JBL 125 Refoam Kit Angle- RFK10 JBL125 |
|
$ 22.00 | ||
|
RFK10 JBL 125 Angle Attach FOAM for JBL 125 and 127 woofers. Perfect for JBL model 125 or 127 woofers. Can use foam roll up or inverted- roll down. Can be used with woofers in these models: JBL 10688, JBL A0911A, JBL 71743L5, JBL 118, JBL 118H, JBL 125, JBL 125A, JBL 127, JBL 127A, JBL 127H, JBL 127H-1, JBL 310G2, JBL 310G3, JBL 410G JBL 410G-1, 2, 3, JBL 70443-01, JBL J216, JBL J325, JBL J325A, JBL J350, JBL J350A, JBL940, JBL L25, JBL L26, JBL L26A, JBL L36, JBL L36A, JBL L40, JBL L40A, JBL L50, JBL L50A, JBL L56, JBL L56A, JBL L80GI, JBL L80T, JBL L120, JBL L120A JBL LX55, JBL LX600, JBL R133, JBL XPL160, JBL XPL160A, JBL 4410 FOAM: OD 9.5″ (241.300 mm) – ID 7.25″ (180.975 mm) ROLL: OD 8.875″ (225.425 mm) – ID 7.625″ (193.675 mm) |
||||
| 10" JBL 125 Refoam Kit Angle- RFK10 JBL125 |
|
$ 22.00 | ||
|
RFK10 JBL 125 Angle Attach FOAM for JBL 125 and 127 woofers. Perfect for JBL model 125 or 127 woofers. Can use foam roll up or inverted- roll down. Can be used with woofers in these models: JBL 10688, JBL A0911A, JBL 71743L5, JBL 118, JBL 118H, JBL 125, JBL 125A, JBL 127, JBL 127A, JBL 127H, JBL 127H-1, JBL 310G2, JBL 310G3, JBL 410G JBL 410G-1, 2, 3, JBL 70443-01, JBL J216, JBL J325, JBL J325A, JBL J350, JBL J350A, JBL940, JBL L25, JBL L26, JBL L26A, JBL L36, JBL L36A, JBL L40, JBL L40A, JBL L50, JBL L50A, JBL L56, JBL L56A, JBL L80GI, JBL L80T, JBL L120, JBL L120A JBL LX55, JBL LX600, JBL R133, JBL XPL160, JBL XPL160A, JBL 4410 FOAM: OD 9.5″ (241.300 mm) – ID 7.25″ (180.975 mm) ROLL: OD 8.875″ (225.425 mm) – ID 7.625″ (193.675 mm) |
||||
| 10" JBL LE10 Refoam Kit- RFKLE10 |
|
$ 30.00 | ||
|
RFKLE10 Angle Attach Foam Perfect for LE10 woofer found in JBL 2121, JBL 2121A,H, JBL 2122, JBL 2122A,H JBL LE10, JBL LE10A,H, H-1, JBL LE111, JBL LE111A, B,H, JBL LX4-2, JBL L66, JBL L77, JBL L96, JBL L110, JBL L110A, JBL PR10, JBL S105, JBL 4313, JBL 4313B, JBL 4345 MID plus many others. FOAM: OD 8.68″ (220.65 mm) – ID 7.125″ (180.975 mm) ROLL: OD 8.438″ (214.325 mm) – ID 7.562″ (192.074 mm)
|
||||
| 10" JBL LE10 Refoam Kit- RFKLE10 |
|
$ 30.00 | ||
|
RFKLE10 Angle Attach Foam Perfect for LE10 woofer found in JBL 2121, JBL 2121A,H, JBL 2122, JBL 2122A,H JBL LE10, JBL LE10A,H, H-1, JBL LE111, JBL LE111A, B,H, JBL LX4-2, JBL L66, JBL L77, JBL L96, JBL L110, JBL L110A, JBL PR10, JBL S105, JBL 4313, JBL 4313B, JBL 4345 MID plus many others. FOAM: OD 8.68″ (220.65 mm) – ID 7.125″ (180.975 mm) ROLL: OD 8.438″ (214.325 mm) – ID 7.562″ (192.074 mm)
|
||||
| 10" JL Audio Refoam Kit Flat- RFK10JL FLAT |
|
$ 22.00 | ||
|
RFK10JL FLAT JL Audio Style – Flat Attach- reuse original dustcap if possible FOAM: OD 9.5″ (241.30 mm) – ID 7.0″ (177.80 mm) ROLL: OD 9.0″ (228.60 mm) – ID 9.0″ (184.15 mm)
|
||||
| 10" JL Audio Refoam Kit Flat- RFK10JL FLAT |
|
$ 22.00 | ||
|
RFK10JL FLAT JL Audio Style – Flat Attach- reuse original dustcap if possible FOAM: OD 9.5″ (241.30 mm) – ID 7.0″ (177.80 mm) ROLL: OD 9.0″ (228.60 mm) – ID 9.0″ (184.15 mm)
|
||||
| 10" Kef Refoam Kit -no donut- RFK10 KEF |
|
$ 30.00 | ||
|
RFK10 KEF This kit fits the KEF 107 and KEF 107/2 woofers and more. FOAM: OD 9.875″ (250.825 mm) – ID 7.625 (193.675 mm) ROLL: OD 9.188″ (233.375 mm) – ID 8.125 (206.375 mm) |
||||
| 10" Kef Refoam Kit -no donut- RFK10 KEF |
|
$ 30.00 | ||
|
RFK10 KEF This kit fits the KEF 107 and KEF 107/2 woofers and more. FOAM: OD 9.875″ (250.825 mm) – ID 7.625 (193.675 mm) ROLL: OD 9.188″ (233.375 mm) – ID 8.125 (206.375 mm) |
||||
| 10" Kef Refoam Kit with Donut- RFK10KEF+DNT |
|
$ 40.00 | ||
|
RFK10KEF+DNT Foam has Flatish Angle Attach and kit comes with Donuts – This kit fits the KEF 107, KEF 107/2 and more. FOAM: OD 9.875″ (250.825 mm) – ID 7.625 (193.675 mm) ROLL: OD 9.188″ (233.375 mm) – ID 8.125 (206.375 mm) DONUT FOAM OD 2.75″ (69.85 mm) – ID .813 (20.65 mm) DONUT ROLL OD 2.5″ (63.5 mm) – ID 1.125″ (28.575 mm)
|
||||
| 10" Kef Refoam Kit with Donut- RFK10KEF+DNT |
|
$ 40.00 | ||
|
RFK10KEF+DNT Foam has Flatish Angle Attach and kit comes with Donuts – This kit fits the KEF 107, KEF 107/2 and more. FOAM: OD 9.875″ (250.825 mm) – ID 7.625 (193.675 mm) ROLL: OD 9.188″ (233.375 mm) – ID 8.125 (206.375 mm) DONUT FOAM OD 2.75″ (69.85 mm) – ID .813 (20.65 mm) DONUT ROLL OD 2.5″ (63.5 mm) – ID 1.125″ (28.575 mm)
|
||||
| 10" Passive Radiator Refoam Plate- RFK10 PLATE |
|
$ 40.00 | ||
|
10″ Passive Radiator Refoam Plate - For use in Passive Radiator with flat surface. Perfect for ESS flat passive radiators. We also have kits for Passives Radiators with the Angle Cone appearance. Call for more info. FOAM PLATE: OD 9.75″ (247.650 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.75″ (196.85 mm)
|
||||
| 10" Passive Radiator Refoam Plate- RFK10 PLATE |
|
$ 40.00 | ||
|
10″ Passive Radiator Refoam Plate - For use in Passive Radiator with flat surface. Perfect for ESS flat passive radiators. We also have kits for Passives Radiators with the Angle Cone appearance. Call for more info. FOAM PLATE: OD 9.75″ (247.650 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.75″ (196.85 mm)
|
||||
| 10" Refoam Kit "m" ROLL- RFK10 m ROLL |
|
$ 32.00 | ||
|
RFK10 M ROLL Flatish Angle Attach - double roll in one foam. looks like top of the letter ”m” Perfect for Toyota, Cadillac, Lexus, Mark Levinson speaker FOAM: OD 10.25″ (260.35 mm) – ID 6.875″ (174.625 mm) ROLL: OD 9.125″ (231.775 mm) – ID 7.428″ (188.925 mm)
|
||||
| 10" Refoam Kit Angle- RFK10 ANGLE |
|
$ 22.00 | ||
|
RFK10 ANGLE Great for most Infinity model woofers FOAM:- OD 9.75″ (247.65 mm) – ID 7.125″ (165.10 mm) ROLL: OD 8.875″ (225.425 mm) – ID 7.5″ (190.50 mm) |
||||
| 10" Refoam Kit Angle- RFK10 ANGLE |
|
$ 22.00 | ||
|
RFK10 ANGLE Great for most Infinity model woofers FOAM:- OD 9.75″ (247.65 mm) – ID 7.125″ (165.10 mm) ROLL: OD 8.875″ (225.425 mm) – ID 7.5″ (190.50 mm) |
||||
| 10" Refoam Kit Flat- RFK10 FLAT |
|
$ 22.00 | ||
|
RFK10 FLAT Flat Attach Use with Advent 12″ Masonite ring frame, Bose 501, and many more. FOAM: OD 9.618″ (244.297 mm) – ID 7.128″ (181.051 mm) ROLL: OD 8.813″ (223.85 mm) – ID 7.438″ (188.925 mm)
|
||||
| 10" Refoam Kit Flat- RFK10 FLAT |
|
$ 22.00 | ||
|
RFK10 FLAT Flat Attach Use with Advent 12″ Masonite ring frame, Bose 501, and many more. FOAM: OD 9.618″ (244.297 mm) – ID 7.128″ (181.051 mm) ROLL: OD 8.813″ (223.85 mm) – ID 7.438″ (188.925 mm)
|
||||
| 10" Rockford Fosgate Refoam Kit Angle- RFK10 RF |
|
$ 35.00 | ||
|
RFK10 RF FOAM for 10″ Rockford Fosgate - Check your measurements. DOES NOT FIT ALL Rockfords. Try to reuse the old dust caps if possible. FOAM: OD 9.75″ (247.65 mm) – ID 6.5″ (165.10 mm) ROLL: OD 9.125″ (231.775 mm) – ID 6.938 (176.224 mm)
|
||||
| 10" Rockford Fosgate Refoam Kit Angle- RFK10 RF |
|
$ 35.00 | ||
|
RFK10 RF FOAM for 10″ Rockford Fosgate - Check your measurements. DOES NOT FIT ALL Rockfords. Try to reuse the old dust caps if possible. FOAM: OD 9.75″ (247.65 mm) – ID 6.5″ (165.10 mm) ROLL: OD 9.125″ (231.775 mm) – ID 6.938 (176.224 mm)
|
||||
| 10" Speaker Grill |
|
$ 8.00 | ||
| 10" Speaker Grill |
|
$ 8.00 | ||
| 10" Speaker Grill -2 pc. |
|
$ 14.00 | ||
|
SG-M10 10″ Round 2 pc. Snap-in Speaker Grill |
||||
| 10" Speaker Grill -2 pc. |
|
$ 14.00 | ||
|
SG-M10 10″ Round 2 pc. Snap-in Speaker Grill |
||||
| 10" Square Frame Woofer |
|
$ 35.00 | ||
|
1077 10″ woofer with square frame, 8 ohm, Power 150 Watts Max, Outside Diameter 10 3/4″, 10.75″ wide from flat side to flat side , 12″ on a diagonal, 1.5″ voice coil |
||||
| 10" Square Frame Woofer |
|
$ 35.00 | ||
|
1077 10″ woofer with square frame, 8 ohm, Power 150 Watts Max, Outside Diameter 10 3/4″, 10.75″ wide from flat side to flat side , 12″ on a diagonal, 1.5″ voice coil |
||||
| 10" Square Zenith Woofer |
|
$ 20.00 | ||
|
Z491375 10″ Square frame shielded woofer. 20 oz shielded alnico magnet, 1″ voice coil, latex treated cloth surround, 60 Watts RMS, 8 ohms, 28 -2000 Hz, s, 10.25″ wide flat side to flat side, 11.5″ wide across the diagonal. Square frame Pioneer, Sansui, etc replacements. |
||||
| 10" Square Zenith Woofer |
|
$ 20.00 | ||
|
Z491375 10″ Square frame shielded woofer. 20 oz shielded alnico magnet, 1″ voice coil, latex treated cloth surround, 60 Watts RMS, 8 ohms, 28 -2000 Hz, s, 10.25″ wide flat side to flat side, 11.5″ wide across the diagonal. Square frame Pioneer, Sansui, etc replacements. |
||||
| 10" Stereo Woofer |
|
$ 55.00 | ||
|
108P 10″ poly cone, foam surround. 27-2000 Hz, 150 Watts RMS, 6 ohms, 2″ dual voice coil (can be used dual or single voice coil), magnet weight 25 oz. Dimensions: outside frame 10″, center mounting hole across speaker to center mounting hole approx 9.75″, cabinet hole size 9.5″ |
||||
| 10" Stereo Woofer |
|
$ 55.00 | ||
|
108P 10″ poly cone, foam surround. 27-2000 Hz, 150 Watts RMS, 6 ohms, 2″ dual voice coil (can be used dual or single voice coil), magnet weight 25 oz. Dimensions: outside frame 10″, center mounting hole across speaker to center mounting hole approx 9.75″, cabinet hole size 9.5″ |
||||
| 10" Tannoy Neoprene Refoam Kit - RFK10 TANNOY |
|
$ 60.00 | ||
|
RFK10 TANNOY Flat Attach Foam typical of Tannoy surrounds with a narrower than average roll and lightweight surround FOAM: OD: 9.938″ (252.425mm) - ID 7.375″ (187.325mm) ROLL: OD 8.875″ (225.425mm) - ID 7.625 (193.675mm) |
||||
| 10" Tannoy Neoprene Refoam Kit - RFK10 TANNOY |
|
$ 60.00 | ||
|
RFK10 TANNOY Flat Attach Foam typical of Tannoy surrounds with a narrower than average roll and lightweight surround FOAM: OD: 9.938″ (252.425mm) - ID 7.375″ (187.325mm) ROLL: OD 8.875″ (225.425mm) - ID 7.625 (193.675mm) |
||||
| 11" AR Refoam Kit- RFK11- AR 1, 3, 3A, 9, 9LS, 10II, 50C, 58, 91, 98LS |
|
$ 22.00 | ||
|
RFK11 FOAM for the 11″ AR - Angle Attach Foam Perfect for AR 1, AR3, AR3A, AR9, AR9LS, AR10 series II, AR50C, AR58. AR91. AR98LS FOAM: OD 10.375″ (263.525 mm) – ID 8.0″ (203.20 mm) ROLL: ID 9.875″ (250.825 mm) – ID 8.5″ (215.90 mm)
|
||||
| 11" AR Refoam Kit- RFK11- AR 1, 3, 3A, 9, 9LS, 10II, 50C, 58, 91, 98LS |
|
$ 22.00 | ||
|
RFK11 FOAM for the 11″ AR - Angle Attach Foam Perfect for AR 1, AR3, AR3A, AR9, AR9LS, AR10 series II, AR50C, AR58. AR91. AR98LS FOAM: OD 10.375″ (263.525 mm) – ID 8.0″ (203.20 mm) ROLL: ID 9.875″ (250.825 mm) – ID 8.5″ (215.90 mm)
|
||||
| 11" DYNAUDIO REFOAM KIT- RFK11 DYNAUD |
|
$ 30.00 | ||
|
RFK11 DYNAUD Angle Attach Foam- perfect for 11″ DYNAUDIO Refoam Kit - FOAM: OD 10.23″ (260.00 mm) – ID 7.87″ (200.00 mm) ROLL: OD 9.875″ (250.825 mm) – ID 8.125″ (206.375 mm)
|
||||
| 11" DYNAUDIO REFOAM KIT- RFK11 DYNAUD |
|
$ 30.00 | ||
|
RFK11 DYNAUD Angle Attach Foam- perfect for 11″ DYNAUDIO Refoam Kit - FOAM: OD 10.23″ (260.00 mm) – ID 7.87″ (200.00 mm) ROLL: OD 9.875″ (250.825 mm) – ID 8.125″ (206.375 mm)
|
||||
| 12" Speaker Grill -2 pc. |
|
$ 17.00 | ||
|
SG-M12 12″ Round 2 pc. Snap-in Speaker Grill |
||||
| 12" Speaker Grill -2 pc. |
|
$ 17.00 | ||
|
SG-M12 12″ Round 2 pc. Snap-in Speaker Grill |
||||
| 12" Advent w Metal Flange -RFK ADV12 FLN- Dahlquist DQ-10 |
|
$ 22.00 | ||
|
RFK ADV12 FLN Flat Attach Foam perfect for Advent with 12″ Frame and inside Metal Flange. Perfect for DAHLQUIST DQ10. New Woofers also available. NOT FOR 12″ Advent (10″ cone) with inside Masonite Gasket- for this you need RFK10 FLAT FOAM: OD 9.375″ (235.00 mm) – ID 7.125″ (182.00 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.562″ (192.074 mm) |
||||
| 12" Advent w Metal Flange -RFK ADV12 FLN- Dahlquist DQ-10 |
|
$ 22.00 | ||
|
RFK ADV12 FLN Flat Attach Foam perfect for Advent with 12″ Frame and inside Metal Flange. Perfect for DAHLQUIST DQ10. New Woofers also available. NOT FOR 12″ Advent (10″ cone) with inside Masonite Gasket- for this you need RFK10 FLAT FOAM: OD 9.375″ (235.00 mm) – ID 7.125″ (182.00 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.562″ (192.074 mm) |
||||
| 12" Ceiling Grill White |
|
$ 16.00 | ||
|
070 Ceiling Grill 12″ Round- White |
||||
| 12" Ceiling Grill White |
|
$ 16.00 | ||
|
070 Ceiling Grill 12″ Round- White |
||||
| 12" CV RED Refoam Kit Angle -RFK12 RED |
|
$ 30.00 | ||
|
RFK12 RED Red Foam with Angle Attach Cerwin Vega Style – top of foam is red, bottom of foam is gray. This kit fits the 122D2, 122T2, 12TR, 122W2, 122W4, 122WT, 123W, 12W1, 12W2, , 12W3, 12-W3, 12W4, AT12, ATW12, ATW121, DXW12, L121-4, REW12, VSW12, W12 and many more. FOAM: OD 11.50″ (292.10 mm) – ID 8.75″ (222.250 mm) ROLL: OD 10.813″ (274.65 mm) – ID 9.5″ (241.30 mm)
|
||||
| 12" CV RED Refoam Kit Angle -RFK12 RED |
|
$ 30.00 | ||
|
RFK12 RED Red Foam with Angle Attach Cerwin Vega Style – top of foam is red, bottom of foam is gray. This kit fits the 122D2, 122T2, 12TR, 122W2, 122W4, 122WT, 123W, 12W1, 12W2, , 12W3, 12-W3, 12W4, AT12, ATW12, ATW121, DXW12, L121-4, REW12, VSW12, W12 and many more. FOAM: OD 11.50″ (292.10 mm) – ID 8.75″ (222.250 mm) ROLL: OD 10.813″ (274.65 mm) – ID 9.5″ (241.30 mm)
|
||||
| 12" Infinity SM120 Refoam Kit- RFK12 SM120 |
|
$ 26.00 | ||
|
RFK12 SM120 Angle Attach Foam Infinity SM120, SM125, SM225, woofers. FOAM: OD 11.125″ (282.575 mm) – 8.813″ (224.82 mm) ROLL: OD 10.438″ (265.125 mm) – ID 9.125″ (231.775 mm)
|
||||
| 12" Infinity SM120 Refoam Kit- RFK12 SM120 |
|
$ 26.00 | ||
|
RFK12 SM120 Angle Attach Foam Infinity SM120, SM125, SM225, woofers. FOAM: OD 11.125″ (282.575 mm) – 8.813″ (224.82 mm) ROLL: OD 10.438″ (265.125 mm) – ID 9.125″ (231.775 mm)
|
||||
| 12" JBL 122, 128 Refoam Kit- RFK128 JBL |
|
$ 30.00 | ||
|
RFK128 Angle Attach Foam We use this foam for the OHM F repair but this is a very difficult DIY repair for beginners. This foam is perfect for the JBL 122, 1128, 129 woofers used in the L65 and other model cabinets. Also for JBL woofers found in models JBL 119HS, JBL 121, JBL 121A, JBL 122, JBL 122A, JBL 122A-1, JBL 126, JBL 126A, JBL 128, JBL 128A, JBL H, JBL H-1, JBL 129, JBL 129H, JBL 2203, JBL 2203A, JBL 2203H, JBL 2214, JBL 2214A, JBL 2214H, JBL 2214H-1, JBL 4310, JBL 4315, JBL 4315A, JBL 4315B, JBL 4411, JBL 4412, JBL 4425, JBL G125, JBL L55A, JBL L65, JBL L65A, JBL L65B, JBL L100GI, JBL L100S, JBL L100T, JBL L100T3, JBL L112, JBL L150, JBL L150A, JBL L150B, JBL L166, JBL L166A, JBL L200T3, JBL 120T3, JBL PR12, JBL PR300, JBL S70, JBL S 70, JBL S101, JBL S106, JBL XPL200, JBL Control 10, JBL Control 12, JBL UREI 809, UREI 809A FOAM: OD 11.437″ (290.50 mm) – ID 9.062″ (230.175 mm) ROLL: OD 10.625″ (269.875 mm) – ID 9.313″ (236.55 mm)
|
||||
| 12" JBL 122, 128 Refoam Kit- RFK128 JBL |
|
$ 30.00 | ||
|
RFK128 Angle Attach Foam We use this foam for the OHM F repair but this is a very difficult DIY repair for beginners. This foam is perfect for the JBL 122, 1128, 129 woofers used in the L65 and other model cabinets. Also for JBL woofers found in models JBL 119HS, JBL 121, JBL 121A, JBL 122, JBL 122A, JBL 122A-1, JBL 126, JBL 126A, JBL 128, JBL 128A, JBL H, JBL H-1, JBL 129, JBL 129H, JBL 2203, JBL 2203A, JBL 2203H, JBL 2214, JBL 2214A, JBL 2214H, JBL 2214H-1, JBL 4310, JBL 4315, JBL 4315A, JBL 4315B, JBL 4411, JBL 4412, JBL 4425, JBL G125, JBL L55A, JBL L65, JBL L65A, JBL L65B, JBL L100GI, JBL L100S, JBL L100T, JBL L100T3, JBL L112, JBL L150, JBL L150A, JBL L150B, JBL L166, JBL L166A, JBL L200T3, JBL 120T3, JBL PR12, JBL PR300, JBL S70, JBL S 70, JBL S101, JBL S106, JBL XPL200, JBL Control 10, JBL Control 12, JBL UREI 809, UREI 809A FOAM: OD 11.437″ (290.50 mm) – ID 9.062″ (230.175 mm) ROLL: OD 10.625″ (269.875 mm) – ID 9.313″ (236.55 mm)
|
||||
| 12" JBL 2214 Refoam Kit- RFK12 JBL2214 |
|
$ 22.00 | ||
|
RFK12 JBL2214 Angle Attach Foam Perfect for , but not limited to, JBL woofers in models: JBL 119HS, JBL 121, JBL 121A, JBL 122, JBL 122A, JBL 122A-1, JBL 126, JBL 128, JBL 128A, JBL 128H, JBL 128H-1, JBL 129, JBL 129H, JBL 2203, JBL 2203A, JBL 2203H, JBL, 2214, JBL 2214A, JBL 2214H, JBL 2214H-1, JBL 4310, JBL 4315, JBL 4315A, JBL 4315B, JBL 4411, JBL 4412, JBL 4425, JBL G125, JBL L55A, JBL L65, JBL L65A, JBL L65B, JBL L100GI, JBL L100S, JBL L100T JBL L100T3, JBL L112, JBL L150, JBL L150A, JBL L150B, JBL L166, JBL L166A, JBL L200T3, JBL 120T3, JBL PR12, JBL PR300, JBL S70, JBL S101, JBL S106, JBL XPL200 JBL Control 10, JBL Control 12, JBL UREI 809, JBL UREI 809A FOAM: OD 11.5″ (292.10 mm) – ID 9.0″ (228.60 mm) ROLL: OD 11.125″ (282.575 mm) – ID 9.625″ (244.475 mm)
|
||||
| 12" JBL 2214 Refoam Kit- RFK12 JBL2214 |
|
$ 22.00 | ||
|
RFK12 JBL2214 Angle Attach Foam Perfect for , but not limited to, JBL woofers in models: JBL 119HS, JBL 121, JBL 121A, JBL 122, JBL 122A, JBL 122A-1, JBL 126, JBL 128, JBL 128A, JBL 128H, JBL 128H-1, JBL 129, JBL 129H, JBL 2203, JBL 2203A, JBL 2203H, JBL, 2214, JBL 2214A, JBL 2214H, JBL 2214H-1, JBL 4310, JBL 4315, JBL 4315A, JBL 4315B, JBL 4411, JBL 4412, JBL 4425, JBL G125, JBL L55A, JBL L65, JBL L65A, JBL L65B, JBL L100GI, JBL L100S, JBL L100T JBL L100T3, JBL L112, JBL L150, JBL L150A, JBL L150B, JBL L166, JBL L166A, JBL L200T3, JBL 120T3, JBL PR12, JBL PR300, JBL S70, JBL S101, JBL S106, JBL XPL200 JBL Control 10, JBL Control 12, JBL UREI 809, JBL UREI 809A FOAM: OD 11.5″ (292.10 mm) – ID 9.0″ (228.60 mm) ROLL: OD 11.125″ (282.575 mm) – ID 9.625″ (244.475 mm)
|
||||
| 12" JL Audio Refoam Kit Flat- RFK12JL FLAT |
|
$ 25.00 | ||
|
RFK12JL FLAT Flat Attach Foam Reuse the original dustcap if possible. Perfect for Original 12W6 and 12W6 V2 speakers FOAM: OD 11.562″ (293.675 mm) – ID 8.75″ (222.25 mm) ROLL: OD 11.188″ (284.175 mm) – ID 9.5″ (241.300 mm)
|
||||
| 12" JL Audio Refoam Kit Flat- RFK12JL FLAT |
|
$ 25.00 | ||
|
RFK12JL FLAT Flat Attach Foam Reuse the original dustcap if possible. Perfect for Original 12W6 and 12W6 V2 speakers FOAM: OD 11.562″ (293.675 mm) – ID 8.75″ (222.25 mm) ROLL: OD 11.188″ (284.175 mm) – ID 9.5″ (241.300 mm)
|
||||
| 12" Passive Radiator Refoam Plate- RFK12 PLATE |
|
$ 50.00 | ||
|
RFK12 PLATE 12″ Passive Radiator Refoam Plate - for passive radiators with Flat top plate. we also have parts for 12″ Passive Radiators with an angled cone- Call for more info FOAM: OD 11.75″ (298.45 mm) ROLL: OD 10.562 ” (268.275 mm) – ID 9.375″ (238.125 mm)
|
||||
| 12" Passive Radiator Refoam Plate- RFK12 PLATE |
|
$ 50.00 | ||
|
RFK12 PLATE 12″ Passive Radiator Refoam Plate - for passive radiators with Flat top plate. we also have parts for 12″ Passive Radiators with an angled cone- Call for more info FOAM: OD 11.75″ (298.45 mm) ROLL: OD 10.562 ” (268.275 mm) – ID 9.375″ (238.125 mm)
|
||||
| 12" Poly Cone Die Cast Woofer - 4 ohms |
|
$ 84.00 | ||
|
GW12-4 12″ woofer, poly-mica cone, rubber surround, die-cast aluminum frame with 5-way gold-plated binding posts, bumper plate, vented pole piece, and 50 oz. magnet, 225 Watts RMS, 450 Watts Max, 2″ -4 layer aluminum voice coil diameter, 4 ohms, 20-3,500 Hz, for all musical and PA applications |
||||
| 12" Poly Cone Die Cast Woofer - 4 ohms |
|
$ 84.00 | ||
|
GW12-4 12″ woofer, poly-mica cone, rubber surround, die-cast aluminum frame with 5-way gold-plated binding posts, bumper plate, vented pole piece, and 50 oz. magnet, 225 Watts RMS, 450 Watts Max, 2″ -4 layer aluminum voice coil diameter, 4 ohms, 20-3,500 Hz, for all musical and PA applications |
||||
| 12" Poly Cone Die Cast Woofer - 4 ohms |
|
$ 84.00 | ||
|
GW12-4 12″ woofer, poly-mica cone, rubber surround, die-cast aluminum frame with 5-way gold-plated binding posts, bumper plate, vented pole piece, and 50 oz. magnet, 225 Watts RMS, 450 Watts Max, 2″ -4 layer aluminum voice coil diameter, 4 ohms, 20-3,500 Hz, for all musical and PA applications |
||||
| 12" Poly Cone Die Cast Woofer - 8 ohms |
|
$ 84.00 | ||
|
GW12 12″ woofer, poly-mica cone, rubber surround, die-cast aluminum frame with 5-way gold-plated binding posts, bumper plate, vented pole piece, and 50 oz. magnet, 225 watts RMS/450 watts Max, 2″ -4 layer aluminum voice coil, 8 ohms, 20-3,500, for all musical and PA applications |
||||
| 12" Poly Cone Die Cast Woofer - 8 ohms |
|
$ 84.00 | ||
|
GW12 12″ woofer, poly-mica cone, rubber surround, die-cast aluminum frame with 5-way gold-plated binding posts, bumper plate, vented pole piece, and 50 oz. magnet, 225 watts RMS/450 watts Max, 2″ -4 layer aluminum voice coil, 8 ohms, 20-3,500, for all musical and PA applications |
||||
| 12" Poly Cone Die Cast Woofer - 8 ohms |
|
$ 84.00 | ||
|
GW12 12″ woofer, poly-mica cone, rubber surround, die-cast aluminum frame with 5-way gold-plated binding posts, bumper plate, vented pole piece, and 50 oz. magnet, 225 watts RMS/450 watts Max, 2″ -4 layer aluminum voice coil, 8 ohms, 20-3,500, for all musical and PA applications |
||||
| 12" Refoam Kit Angle -RFK12 ANGLE |
|
$ 22.00 | ||
|
RFK12 ANGLE Angle Attach Foam - FOAM: OD 11.70″ (297.180 mm) – ID 9.0″ (228.60 mm) ROLL: OD 10.625″ (269.875 mm) – ID 9.375″ (238.125 mm)
|
||||
| 12" Refoam Kit Angle -RFK12 ANGLE |
|
$ 22.00 | ||
|
RFK12 ANGLE Angle Attach Foam - FOAM: OD 11.70″ (297.180 mm) – ID 9.0″ (228.60 mm) ROLL: OD 10.625″ (269.875 mm) – ID 9.375″ (238.125 mm)
|
||||
| 12" Refoam Kit FAT Roll Angle - RFK12FAT |
|
$ 45.00 | ||
|
RFK12FAT Flat Attach Foam FOAM: OD 11.875″ (301.625 mm) – ID 7.125″ (180.975 mm) ROLL: OD 11.03″ (280.187 mm) – ID 7.5″ (190.500 mm)
|
||||
| 12" Refoam Kit FAT Roll Angle - RFK12FAT |
|
$ 45.00 | ||
|
RFK12FAT Flat Attach Foam FOAM: OD 11.875″ (301.625 mm) – ID 7.125″ (180.975 mm) ROLL: OD 11.03″ (280.187 mm) – ID 7.5″ (190.500 mm)
|
||||
| 12" Refoam Kit Flat -RFK12 FLAT |
|
$ 22.00 | ||
|
RFK12 FLAT Flat Attach Foam FOAM: OD 11.75″ (298.450 mm) – ID 9.0″ (228.60 mm) ROLL: OD 10.5″ (266.70 mm) – ID 9.5″ (241.30 mm)
|
||||
| 12" Refoam Kit Flat -RFK12 FLAT |
|
$ 22.00 | ||
|
RFK12 FLAT Flat Attach Foam FOAM: OD 11.75″ (298.450 mm) – ID 9.0″ (228.60 mm) ROLL: OD 10.5″ (266.70 mm) – ID 9.5″ (241.30 mm)
|
||||
| 12" Rockford Fosgate Refoam Kit-RFK12 RF |
|
$ 35.00 | ||
|
RFK12 RF Angle Attach Foam Rockford Fosgate Style - Check your measurements. DOES NOT FIT ALL Rockfords. FOAM: OD 11.75″ (298.40 mm) – ID 8.25″ (209.55 mm) ROLL: ID 10.938″ (277.825 mm) – ID 8.75″ (222.250 mm)
|
||||
| 12" Rockford Fosgate Refoam Kit-RFK12 RF |
|
$ 35.00 | ||
|
RFK12 RF Angle Attach Foam Rockford Fosgate Style - Check your measurements. DOES NOT FIT ALL Rockfords. FOAM: OD 11.75″ (298.40 mm) – ID 8.25″ (209.55 mm) ROLL: ID 10.938″ (277.825 mm) – ID 8.75″ (222.250 mm)
|
||||
| 12" Speaker Grill |
|
$ 9.00 | ||
| 12" Speaker Grill |
|
$ 9.00 | ||
| 12" Square Frame Woofer |
|
$ 40.00 | ||
|
1277 12″ square speaker, 8 ohm, 235 Watts Max, outside Diameter 12 3/4″ 12.75″ wide from flat side to flat side 14″ on a diagonal |
||||
| 12" Square Frame Woofer |
|
$ 40.00 | ||
|
1277 12″ square speaker, 8 ohm, 235 Watts Max, outside Diameter 12 3/4″ 12.75″ wide from flat side to flat side 14″ on a diagonal |
||||
| 12" Tannoy Refoam Kit- RFK12 TANNOY |
|
$ 75.00 | ||
|
RFK12 TANNOY Angle UP Attach Foam. This foam can be used with Tannoy models HPD-315, HPD-315A, 7900 0009. Balmoral Chatsworth, Charsworth 12, Cheviot MK 1 Cheviot Monitor Royal 12/60, Devon MK 1 and MK 2, Mansfield 12 60 31/201259, 31 201259 FOAM: OD 11.625″ (295.275 mm) – ID 8.75″ (222.25 mm) ROLL: ID 11.25″ (282.575 mm) – ID 9.562″ (242.874 mm)
|
||||
| 12" Tannoy Refoam Kit- RFK12 TANNOY |
|
$ 75.00 | ||
|
RFK12 TANNOY Angle UP Attach Foam. This foam can be used with Tannoy models HPD-315, HPD-315A, 7900 0009. Balmoral Chatsworth, Charsworth 12, Cheviot MK 1 Cheviot Monitor Royal 12/60, Devon MK 1 and MK 2, Mansfield 12 60 31/201259, 31 201259 FOAM: OD 11.625″ (295.275 mm) – ID 8.75″ (222.25 mm) ROLL: ID 11.25″ (282.575 mm) – ID 9.562″ (242.874 mm)
|
||||
| 14" JBL LE14 Refoam Kit- RFKLE14 |
|
$ 30.00 | ||
|
RFKLE14 Angle Attach Foam Perfect for LE14 woofer found in JBL L114, JBL L114A, JBL LE14, JBL LE14A, JBL LE14H, JBL LE14H-1, JBL 1400ND, JBL L55, JBL L101, JBL L220, JBL L220A, JBL L222, JBL L230, JBL L250, JBL Lancer 99, JBL S56, JBL S99, JBL SC99 FOAM: OD 12.187″ (309.55 mm) – ID 10.625″ (269.875 mm) ROLL: OD 11.875″ (301.625 mm) – ID 10.875″ (276.225 mm)
|
||||
| 14" JBL LE14 Refoam Kit- RFKLE14 |
|
$ 30.00 | ||
|
RFKLE14 Angle Attach Foam Perfect for LE14 woofer found in JBL L114, JBL L114A, JBL LE14, JBL LE14A, JBL LE14H, JBL LE14H-1, JBL 1400ND, JBL L55, JBL L101, JBL L220, JBL L220A, JBL L222, JBL L230, JBL L250, JBL Lancer 99, JBL S56, JBL S99, JBL SC99 FOAM: OD 12.187″ (309.55 mm) – ID 10.625″ (269.875 mm) ROLL: OD 11.875″ (301.625 mm) – ID 10.875″ (276.225 mm)
|
||||
| 15" CV Refoam Kit Red Angle- RFK15 RED ANG |
|
$ 40.00 | ||
|
RFK15 RED ANGLE Angle Attach Foam. These kits come with Cerwin Vega logo dustcaps. This foam fits AT15, ATW15, and more. FOAM: OD 14.625″ (371.47 mm) – ID 11.25″ (285.75 mm) ROLL: OD 13.813″ (350.85 mm) – ID 12.5″ (317.50 mm)
|
||||
| 15" CV Refoam Kit Red Angle- RFK15 RED ANG |
|
$ 40.00 | ||
|
RFK15 RED ANGLE Angle Attach Foam. These kits come with Cerwin Vega logo dustcaps. This foam fits AT15, ATW15, and more. FOAM: OD 14.625″ (371.47 mm) – ID 11.25″ (285.75 mm) ROLL: OD 13.813″ (350.85 mm) – ID 12.5″ (317.50 mm)
|
||||
| 15" CV Refoam Kit Red Flat Attach- RFK15 RED |
|
$ 30.00 | ||
|
RFK15 RED FLAT Red Flat Attach Cerwin Vega Style. top of foam red, bottom of foam is gray- This foam fits 152W, 152WR, 153, 154D2, 154W, 154WT, 15W1, 15W2, 15W3, 15W4, 15W5, 317, 317P, AL1002, ALW150, CVT300A, CVT300S, CVW15, D8, D9, DX9, DXW15, E315, HP215, HT515, HT-515, HTS15A, HTW150, HTW151, LS15, LW15, LM100, MX400, MXW15, RE38B, REW15, SUB150, VS150, VSW15, W15, W154. FOAM: OD 14.5″ (368.30 mm) – ID 11.875″ (301.625 mm) ROLL: OD 13.875″ (352.425 mm) – ID 12.375″ (314.325 mm)
|
||||
| 15" CV Refoam Kit Red Flat Attach- RFK15 RED |
|
$ 30.00 | ||
|
RFK15 RED FLAT Red Flat Attach Cerwin Vega Style. top of foam red, bottom of foam is gray- This foam fits 152W, 152WR, 153, 154D2, 154W, 154WT, 15W1, 15W2, 15W3, 15W4, 15W5, 317, 317P, AL1002, ALW150, CVT300A, CVT300S, CVW15, D8, D9, DX9, DXW15, E315, HP215, HT515, HT-515, HTS15A, HTW150, HTW151, LS15, LW15, LM100, MX400, MXW15, RE38B, REW15, SUB150, VS150, VSW15, W15, W154. FOAM: OD 14.5″ (368.30 mm) – ID 11.875″ (301.625 mm) ROLL: OD 13.875″ (352.425 mm) – ID 12.375″ (314.325 mm)
|
||||
| 15" INFINITY SM150 Refoam Kit- RFK15 SM150 |
|
$ 33.00 | ||
|
RFK15 SM150 Angle Attach Foam- This foam fits SM150, SM152, SM155, SM-155, SM15GCF, 902-2687, 902-4305, 902-6707. FOAM: OD 14.50″ (368.30 mm) – ID 11.688″ (296.875 mm) ROLL: OD 13.5″ (342.90 mm) -ID 12.125″ (307.975 mm)
|
||||
| 15" INFINITY SM150 Refoam Kit- RFK15 SM150 |
|
$ 33.00 | ||
|
RFK15 SM150 Angle Attach Foam- This foam fits SM150, SM152, SM155, SM-155, SM15GCF, 902-2687, 902-4305, 902-6707. FOAM: OD 14.50″ (368.30 mm) – ID 11.688″ (296.875 mm) ROLL: OD 13.5″ (342.90 mm) -ID 12.125″ (307.975 mm)
|
||||
| 15" JBL 2235, 2215, LE15, Pioneer HPM150 Refoam Kit |
|
$ 30.00 | ||
|
RFK2235 Amgle Attach Foam- Perfect for 15″ woofer in Pioneer HPM150 and JBL 2235, JBL 2215A and JBL LE15A. Also good for all these JBL models: JBL 135, JBL 135A, JBL 135B, JBL 136, JBL 136A, JBL 136H, JBL 2215, JBL 2215A, JBL 2215B, JBL 2231, JBL 2231A, JBL 2231H, JBL 2234, JBL 2234A, JBL 2234H, JBL 2235, JBL 2235H, JBL B360, JBL L45A, JBL L45B, JBL L71, JBL L71A, JBL L200B, JBL L220, JBL L300, JBL L300A, JBL LE15, JBL LE15A, JBL PR15, JBL PR15C, JBL S51, JBL S61K, JBL S61P, JBL S507, JBL S508, JBL S607, JBL S608, JBL B360, JBL D44000WX, JBL D44000WXA, JBL S61K, JBL S61P, JBL S507, JBL S508, JBL S607, JBL S608, JBL 4320, JBL 4330, JBL 4331, JBL 4331A, JBL 4331B, JBL 4332, JBL 4333, JBL 4333A, JBL 4333B, JBL 4340, JBL 4343, JBL 4343B, JBL 4344, JBL 4350, JBL 4350A, JBL 4350B, JBL 4355, JBL 4430, JBL 4435 FOAM: OD 14.437″ (366.70 mm) – ID 12.063″ (306.375 mm) ROLL: OD 13.375″ (349.250 mm) – ID 12.938″ (328.625 mm)
|
||||
| 15" JBL 2235, 2215, LE15, Pioneer HPM150 Refoam Kit |
|
$ 30.00 | ||
|
RFK2235 Amgle Attach Foam- Perfect for 15″ woofer in Pioneer HPM150 and JBL 2235, JBL 2215A and JBL LE15A. Also good for all these JBL models: JBL 135, JBL 135A, JBL 135B, JBL 136, JBL 136A, JBL 136H, JBL 2215, JBL 2215A, JBL 2215B, JBL 2231, JBL 2231A, JBL 2231H, JBL 2234, JBL 2234A, JBL 2234H, JBL 2235, JBL 2235H, JBL B360, JBL L45A, JBL L45B, JBL L71, JBL L71A, JBL L200B, JBL L220, JBL L300, JBL L300A, JBL LE15, JBL LE15A, JBL PR15, JBL PR15C, JBL S51, JBL S61K, JBL S61P, JBL S507, JBL S508, JBL S607, JBL S608, JBL B360, JBL D44000WX, JBL D44000WXA, JBL S61K, JBL S61P, JBL S507, JBL S508, JBL S607, JBL S608, JBL 4320, JBL 4330, JBL 4331, JBL 4331A, JBL 4331B, JBL 4332, JBL 4333, JBL 4333A, JBL 4333B, JBL 4340, JBL 4343, JBL 4343B, JBL 4344, JBL 4350, JBL 4350A, JBL 4350B, JBL 4355, JBL 4430, JBL 4435 FOAM: OD 14.437″ (366.70 mm) – ID 12.063″ (306.375 mm) ROLL: OD 13.375″ (349.250 mm) – ID 12.938″ (328.625 mm)
|
||||
| 15" JL Audio Refoam Kit Flat- RFK15JL FLAT |
|
$ 25.00 | ||
|
RFK15JL FLAT Flat Attach Foam- JL Audio Style - reuse original dustcap if possible FOAM: OD 14.375″ (365.125 mm) – ID 11.313″ (287.35 mm) ROLL: OD 13.688″ (347.675 mm) – ID 11.75″ (298.40 mm)
|
||||
| 15" JL Audio Refoam Kit Flat- RFK15JL FLAT |
|
$ 25.00 | ||
|
RFK15JL FLAT Flat Attach Foam- JL Audio Style - reuse original dustcap if possible FOAM: OD 14.375″ (365.125 mm) – ID 11.313″ (287.35 mm) ROLL: OD 13.688″ (347.675 mm) – ID 11.75″ (298.40 mm)
|
||||
| 15" Radio Shack Realistic Mach-1 Refoam Kit-Angle -RFK15 MACH also 15" Velodyne w/ accelerometer |
|
$ 35.00 | ||
|
RFK15 MACH Angle Attach Foam- Radio Shack Mach 1 - Perfect for Velodyne 15″ woofer with accelerometer FOAM: OD 14.5″ (368.30 mm) – ID 10.75″ (273.050 mm) ROLL: OD 13.813″ (350.850 mm) – ID 12.188″ (309.575 mm)
|
||||
| 15" Radio Shack Realistic Mach-1 Refoam Kit-Angle -RFK15 MACH also 15" Velodyne w/ accelerometer |
|
$ 35.00 | ||
|
RFK15 MACH Angle Attach Foam- Radio Shack Mach 1 - Perfect for Velodyne 15″ woofer with accelerometer FOAM: OD 14.5″ (368.30 mm) – ID 10.75″ (273.050 mm) ROLL: OD 13.813″ (350.850 mm) – ID 12.188″ (309.575 mm)
|
||||
| 15" Refoam Kit Angle- RFK15 ANGLE |
|
$ 22.00 | ||
|
RFK15 ANGLE Angle Attach Foam FOAM: OD 14.50″ (368.30 mm) – ID 11.31″ (282.70 mm) ROLL: OD 13.875″ (352.425 mm) – ID 12.188″ (309.575 mm)
|
||||
Updating...
Prices Subject to Change
