Refoam Kits- Polyether
Foams available in KITS as singles or pairs or as Foams Only. Foams size changes may occur due to production run variations.........
You can find Refoaming Instructions plus Other Answers at Refoaming FAQ....
Refoam Kits 3″-5″…... Refoam Kits 6″ – 8″ ….Refoam Kits 10″ ….Refoam Kits 11″ – 12″ ….. Refoam Kits 14" -15" …. Refoam Kits 18″
| 10" Advent Refoam Kit SM- RFK ADV10 SM |
|
$ 22.00 | ||
|
RFK ADV10 SM Flat attach Foam Surrounds for Smaller Advent Woofer. This is not for the 12″ frame with the metal flange or the 12″ frame with the Masonite Gasket. FOAM: OD 8.938″ (227.025 mm) – ID 6.625″ (168.275 mm) ROLL: OD 8.5″ (215.900 m) – ID 7.0″ (177.80 mm) |
||||
| 10" CV style Refoam Kit Red Angle- RFK10 RED |
|
$ 28.00 | ||
|
RFK10 RED Flatish Angle Attach Foam- Cerwin Vega Style – Foam is red on top and bottom (unlike RFK12 Red which is red on top and gray on bottom) Kits come with Cerwin Vega logo dustcap. This foam fits 101W2, 102WT, 10W1, 10W2, 10W3, 250SE, 250-SE, AT10, AT-10 and many more. FOAM: OD 9.562″ (242.875 mm) – ID 7.06″ (179.40 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.562″ (192.074 mm) |
||||
| 10" Infinity Bullet Center Refoam Kit Flangle - RFK10 INFIN |
|
$ 30.00 | ||
|
RFK10 INFIN BULLET Foam for Infinity with Flatish Angle Attach with a Bullet Dust Cap only – no dustcaps or shims needed. Do Not Remove Center “Bullet” (see picture for example). Recenter new foam by eye, ear and feel FOAM: OD 9.625″ (244.475 mm) – ID 6.813″ (173.05 mm) ROLL: OD 8.875″ )225.425 mm) – ID 7.438″ (188.925 mm)
|
||||
| 10" JBL 125 Refoam Kit Angle- RFK10 JBL125 |
|
$ 22.00 | ||
|
RFK10 JBL 125 Angle Attach FOAM for JBL 125 and 127 woofers. Perfect for JBL model 125 or 127 woofers. Can use foam roll up or inverted- roll down. Can be used with woofers in these models: JBL 10688, JBL A0911A, JBL 71743L5, JBL 118, JBL 118H, JBL 125, JBL 125A, JBL 127, JBL 127A, JBL 127H, JBL 127H-1, JBL 310G2, JBL 310G3, JBL 410G JBL 410G-1, 2, 3, JBL 70443-01, JBL J216, JBL J325, JBL J325A, JBL J350, JBL J350A, JBL940, JBL L25, JBL L26, JBL L26A, JBL L36, JBL L36A, JBL L40, JBL L40A, JBL L50, JBL L50A, JBL L56, JBL L56A, JBL L80GI, JBL L80T, JBL L120, JBL L120A JBL LX55, JBL LX600, JBL R133, JBL XPL160, JBL XPL160A, JBL 4410 FOAM: OD 9.5″ (241.300 mm) – ID 7.25″ (180.975 mm) ROLL: OD 8.875″ (225.425 mm) – ID 7.625″ (193.675 mm) |
||||
| 10" JBL LE10 Refoam Kit- RFKLE10 |
|
$ 30.00 | ||
|
RFKLE10 Angle Attach Foam Perfect for LE10 woofer found in JBL 2121, JBL 2121A,H, JBL 2122, JBL 2122A,H JBL LE10, JBL LE10A,H, H-1, JBL LE111, JBL LE111A, B,H, JBL LX4-2, JBL L66, JBL L77, JBL L96, JBL L110, JBL L110A, JBL PR10, JBL S105, JBL 4313, JBL 4313B, JBL 4345 MID plus many others. FOAM: OD 8.68″ (220.65 mm) – ID 7.125″ (180.975 mm) ROLL: OD 8.438″ (214.325 mm) – ID 7.562″ (192.074 mm)
|
||||
| 10" JL Audio Refoam Kit Flat- RFK10JL FLAT |
|
$ 22.00 | ||
|
RFK10JL FLAT JL Audio Style – Flat Attach- reuse original dustcap if possible FOAM: OD 9.5″ (241.30 mm) – ID 7.0″ (177.80 mm) ROLL: OD 9.0″ (228.60 mm) – ID 9.0″ (184.15 mm)
|
||||
| 10" Kef Refoam Kit -no donut- RFK10 KEF |
|
$ 30.00 | ||
|
RFK10 KEF This kit fits the KEF 107 and KEF 107/2 woofers and more. FOAM: OD 9.875″ (250.825 mm) – ID 7.625 (193.675 mm) ROLL: OD 9.188″ (233.375 mm) – ID 8.125 (206.375 mm) |
||||
| 10" Kef Refoam Kit with Donut- RFK10KEF+DNT |
|
$ 40.00 | ||
|
RFK10KEF+DNT Foam has Flatish Angle Attach and kit comes with Donuts – This kit fits the KEF 107, KEF 107/2 and more. FOAM: OD 9.875″ (250.825 mm) – ID 7.625 (193.675 mm) ROLL: OD 9.188″ (233.375 mm) – ID 8.125 (206.375 mm) DONUT FOAM OD 2.75″ (69.85 mm) – ID .813 (20.65 mm) DONUT ROLL OD 2.5″ (63.5 mm) – ID 1.125″ (28.575 mm)
|
||||
| 10" Passive Radiator Refoam Plate- RFK10 PLATE |
|
$ 40.00 | ||
|
10″ Passive Radiator Refoam Plate - For use in Passive Radiator with flat surface. Perfect for ESS flat passive radiators. We also have kits for Passives Radiators with the Angle Cone appearance. Call for more info. FOAM PLATE: OD 9.75″ (247.650 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.75″ (196.85 mm)
|
||||
| 10" Refoam Kit "m" ROLL- RFK10 m ROLL |
|
$ 32.00 | ||
|
RFK10 M ROLL Flatish Angle Attach - double roll in one foam. looks like top of the letter ”m” Perfect for Toyota, Cadillac, Lexus, Mark Levinson speaker FOAM: OD 10.25″ (260.35 mm) – ID 6.875″ (174.625 mm) ROLL: OD 9.125″ (231.775 mm) – ID 7.428″ (188.925 mm)
|
||||
| 10" Refoam Kit Angle- RFK10 ANGLE |
|
$ 22.00 | ||
|
RFK10 ANGLE Great for most Infinity model woofers FOAM:- OD 9.75″ (247.65 mm) – ID 7.125″ (165.10 mm) ROLL: OD 8.875″ (225.425 mm) – ID 7.5″ (190.50 mm) |
||||
| 10" Refoam Kit Flat- RFK10 FLAT |
|
$ 22.00 | ||
|
RFK10 FLAT Flat Attach Use with Advent 12″ Masonite ring frame, Bose 501, and many more. FOAM: OD 9.618″ (244.297 mm) – ID 7.128″ (181.051 mm) ROLL: OD 8.813″ (223.85 mm) – ID 7.438″ (188.925 mm)
|
||||
| 10" Rockford Fosgate Refoam Kit Angle- RFK10 RF |
|
$ 35.00 | ||
|
RFK10 RF FOAM for 10″ Rockford Fosgate - Check your measurements. DOES NOT FIT ALL Rockfords. Try to reuse the old dust caps if possible. FOAM: OD 9.75″ (247.65 mm) – ID 6.5″ (165.10 mm) ROLL: OD 9.125″ (231.775 mm) – ID 6.938 (176.224 mm)
|
||||
| 10" Tannoy Neoprene Refoam Kit - RFK10 TANNOY |
|
$ 60.00 | ||
|
RFK10 TANNOY Flat Attach Foam typical of Tannoy surrounds with a narrower than average roll and lightweight surround FOAM: OD: 9.938″ (252.425mm) - ID 7.375″ (187.325mm) ROLL: OD 8.875″ (225.425mm) - ID 7.625 (193.675mm) |
||||
| 11" AR Refoam Kit- RFK11- AR 1, 3, 3A, 9, 9LS, 10II, 50C, 58, 91, 98LS |
|
$ 22.00 | ||
|
RFK11 FOAM for the 11″ AR - Angle Attach Foam Perfect for AR 1, AR3, AR3A, AR9, AR9LS, AR10 series II, AR50C, AR58. AR91. AR98LS FOAM: OD 10.375″ (263.525 mm) – ID 8.0″ (203.20 mm) ROLL: ID 9.875″ (250.825 mm) – ID 8.5″ (215.90 mm)
|
||||
| 11" DYNAUDIO REFOAM KIT- RFK11 DYNAUD |
|
$ 30.00 | ||
|
RFK11 DYNAUD Angle Attach Foam- perfect for 11″ DYNAUDIO Refoam Kit - FOAM: OD 10.23″ (260.00 mm) – ID 7.87″ (200.00 mm) ROLL: OD 9.875″ (250.825 mm) – ID 8.125″ (206.375 mm)
|
||||
| 12" Advent w Metal Flange -RFK ADV12 FLN- Dahlquist DQ-10 |
|
$ 22.00 | ||
|
RFK ADV12 FLN Flat Attach Foam perfect for Advent with 12″ Frame and inside Metal Flange. Perfect for DAHLQUIST DQ10. New Woofers also available. NOT FOR 12″ Advent (10″ cone) with inside Masonite Gasket- for this you need RFK10 FLAT FOAM: OD 9.375″ (235.00 mm) – ID 7.125″ (182.00 mm) ROLL: OD 8.938″ (227.025 mm) – ID 7.562″ (192.074 mm) |
||||
| 12" CV RED Refoam Kit Angle -RFK12 RED |
|
$ 30.00 | ||
|
RFK12 RED Red Foam with Angle Attach Cerwin Vega Style – top of foam is red, bottom of foam is gray. This kit fits the 122D2, 122T2, 12TR, 122W2, 122W4, 122WT, 123W, 12W1, 12W2, , 12W3, 12-W3, 12W4, AT12, ATW12, ATW121, DXW12, L121-4, REW12, VSW12, W12 and many more. FOAM: OD 11.50″ (292.10 mm) – ID 8.75″ (222.250 mm) ROLL: OD 10.813″ (274.65 mm) – ID 9.5″ (241.30 mm)
|
||||
| 12" Infinity SM120 Refoam Kit- RFK12 SM120 |
|
$ 26.00 | ||
|
RFK12 SM120 Angle Attach Foam Infinity SM120, SM125, SM225, woofers. FOAM: OD 11.125″ (282.575 mm) – 8.813″ (224.82 mm) ROLL: OD 10.438″ (265.125 mm) – ID 9.125″ (231.775 mm)
|
||||
| 12" JBL 122, 128 Refoam Kit- RFK128 JBL |
|
$ 30.00 | ||
|
RFK128 Angle Attach Foam We use this foam for the OHM F repair but this is a very difficult DIY repair for beginners. This foam is perfect for the JBL 122, 1128, 129 woofers used in the L65 and other model cabinets. Also for JBL woofers found in models JBL 119HS, JBL 121, JBL 121A, JBL 122, JBL 122A, JBL 122A-1, JBL 126, JBL 126A, JBL 128, JBL 128A, JBL H, JBL H-1, JBL 129, JBL 129H, JBL 2203, JBL 2203A, JBL 2203H, JBL 2214, JBL 2214A, JBL 2214H, JBL 2214H-1, JBL 4310, JBL 4315, JBL 4315A, JBL 4315B, JBL 4411, JBL 4412, JBL 4425, JBL G125, JBL L55A, JBL L65, JBL L65A, JBL L65B, JBL L100GI, JBL L100S, JBL L100T, JBL L100T3, JBL L112, JBL L150, JBL L150A, JBL L150B, JBL L166, JBL L166A, JBL L200T3, JBL 120T3, JBL PR12, JBL PR300, JBL S70, JBL S 70, JBL S101, JBL S106, JBL XPL200, JBL Control 10, JBL Control 12, JBL UREI 809, UREI 809A FOAM: OD 11.437″ (290.50 mm) – ID 9.062″ (230.175 mm) ROLL: OD 10.625″ (269.875 mm) – ID 9.313″ (236.55 mm)
|
||||
| 12" JBL 2214 Refoam Kit- RFK12 JBL2214 |
|
$ 22.00 | ||
|
RFK12 JBL2214 Angle Attach Foam Perfect for , but not limited to, JBL woofers in models: JBL 119HS, JBL 121, JBL 121A, JBL 122, JBL 122A, JBL 122A-1, JBL 126, JBL 128, JBL 128A, JBL 128H, JBL 128H-1, JBL 129, JBL 129H, JBL 2203, JBL 2203A, JBL 2203H, JBL, 2214, JBL 2214A, JBL 2214H, JBL 2214H-1, JBL 4310, JBL 4315, JBL 4315A, JBL 4315B, JBL 4411, JBL 4412, JBL 4425, JBL G125, JBL L55A, JBL L65, JBL L65A, JBL L65B, JBL L100GI, JBL L100S, JBL L100T JBL L100T3, JBL L112, JBL L150, JBL L150A, JBL L150B, JBL L166, JBL L166A, JBL L200T3, JBL 120T3, JBL PR12, JBL PR300, JBL S70, JBL S101, JBL S106, JBL XPL200 JBL Control 10, JBL Control 12, JBL UREI 809, JBL UREI 809A FOAM: OD 11.5″ (292.10 mm) – ID 9.0″ (228.60 mm) ROLL: OD 11.125″ (282.575 mm) – ID 9.625″ (244.475 mm)
|
||||
| 12" JL Audio Refoam Kit Flat- RFK12JL FLAT |
|
$ 25.00 | ||
|
RFK12JL FLAT Flat Attach Foam Reuse the original dustcap if possible. Perfect for Original 12W6 and 12W6 V2 speakers FOAM: OD 11.562″ (293.675 mm) – ID 8.75″ (222.25 mm) ROLL: OD 11.188″ (284.175 mm) – ID 9.5″ (241.300 mm)
|
||||
| 12" Passive Radiator Refoam Plate- RFK12 PLATE |
|
$ 50.00 | ||
|
RFK12 PLATE 12″ Passive Radiator Refoam Plate - for passive radiators with Flat top plate. we also have parts for 12″ Passive Radiators with an angled cone- Call for more info FOAM: OD 11.75″ (298.45 mm) ROLL: OD 10.562 ” (268.275 mm) – ID 9.375″ (238.125 mm)
|
||||
| 12" Refoam Kit Angle -RFK12 ANGLE |
|
$ 22.00 | ||
|
RFK12 ANGLE Angle Attach Foam - FOAM: OD 11.70″ (297.180 mm) – ID 9.0″ (228.60 mm) ROLL: OD 10.625″ (269.875 mm) – ID 9.375″ (238.125 mm)
|
||||
| 12" Refoam Kit FAT Roll Angle - RFK12FAT |
|
$ 45.00 | ||
|
RFK12FAT Flat Attach Foam FOAM: OD 11.875″ (301.625 mm) – ID 7.125″ (180.975 mm) ROLL: OD 11.03″ (280.187 mm) – ID 7.5″ (190.500 mm)
|
||||
| 12" Refoam Kit Flat -RFK12 FLAT |
|
$ 22.00 | ||
|
RFK12 FLAT Flat Attach Foam FOAM: OD 11.75″ (298.450 mm) – ID 9.0″ (228.60 mm) ROLL: OD 10.5″ (266.70 mm) – ID 9.5″ (241.30 mm)
|
||||
| 12" Rockford Fosgate Refoam Kit-RFK12 RF |
|
$ 35.00 | ||
|
RFK12 RF Angle Attach Foam Rockford Fosgate Style - Check your measurements. DOES NOT FIT ALL Rockfords. FOAM: OD 11.75″ (298.40 mm) – ID 8.25″ (209.55 mm) ROLL: ID 10.938″ (277.825 mm) – ID 8.75″ (222.250 mm)
|
||||
| 12" Tannoy Refoam Kit- RFK12 TANNOY |
|
$ 75.00 | ||
|
RFK12 TANNOY Angle UP Attach Foam. This foam can be used with Tannoy models HPD-315, HPD-315A, 7900 0009. Balmoral Chatsworth, Charsworth 12, Cheviot MK 1 Cheviot Monitor Royal 12/60, Devon MK 1 and MK 2, Mansfield 12 60 31/201259, 31 201259 FOAM: OD 11.625″ (295.275 mm) – ID 8.75″ (222.25 mm) ROLL: ID 11.25″ (282.575 mm) – ID 9.562″ (242.874 mm)
|
||||
| 14" JBL LE14 Refoam Kit- RFKLE14 |
|
$ 30.00 | ||
|
RFKLE14 Angle Attach Foam Perfect for LE14 woofer found in JBL L114, JBL L114A, JBL LE14, JBL LE14A, JBL LE14H, JBL LE14H-1, JBL 1400ND, JBL L55, JBL L101, JBL L220, JBL L220A, JBL L222, JBL L230, JBL L250, JBL Lancer 99, JBL S56, JBL S99, JBL SC99 FOAM: OD 12.187″ (309.55 mm) – ID 10.625″ (269.875 mm) ROLL: OD 11.875″ (301.625 mm) – ID 10.875″ (276.225 mm)
|
||||
| 15" CV Refoam Kit Red Angle- RFK15 RED ANG |
|
$ 40.00 | ||
|
RFK15 RED ANGLE Angle Attach Foam. These kits come with Cerwin Vega logo dustcaps. This foam fits AT15, ATW15, and more. FOAM: OD 14.625″ (371.47 mm) – ID 11.25″ (285.75 mm) ROLL: OD 13.813″ (350.85 mm) – ID 12.5″ (317.50 mm)
|
||||
| 15" CV Refoam Kit Red Flat Attach- RFK15 RED |
|
$ 30.00 | ||
|
RFK15 RED FLAT Red Flat Attach Cerwin Vega Style. top of foam red, bottom of foam is gray- This foam fits 152W, 152WR, 153, 154D2, 154W, 154WT, 15W1, 15W2, 15W3, 15W4, 15W5, 317, 317P, AL1002, ALW150, CVT300A, CVT300S, CVW15, D8, D9, DX9, DXW15, E315, HP215, HT515, HT-515, HTS15A, HTW150, HTW151, LS15, LW15, LM100, MX400, MXW15, RE38B, REW15, SUB150, VS150, VSW15, W15, W154. FOAM: OD 14.5″ (368.30 mm) – ID 11.875″ (301.625 mm) ROLL: OD 13.875″ (352.425 mm) – ID 12.375″ (314.325 mm)
|
||||
| 15" INFINITY SM150 Refoam Kit- RFK15 SM150 |
|
$ 33.00 | ||
|
RFK15 SM150 Angle Attach Foam- This foam fits SM150, SM152, SM155, SM-155, SM15GCF, 902-2687, 902-4305, 902-6707. FOAM: OD 14.50″ (368.30 mm) – ID 11.688″ (296.875 mm) ROLL: OD 13.5″ (342.90 mm) -ID 12.125″ (307.975 mm)
|
||||
| 15" JBL 2235, 2215, LE15, Pioneer HPM150 Refoam Kit |
|
$ 30.00 | ||
|
RFK2235 Amgle Attach Foam- Perfect for 15″ woofer in Pioneer HPM150 and JBL 2235, JBL 2215A and JBL LE15A. Also good for all these JBL models: JBL 135, JBL 135A, JBL 135B, JBL 136, JBL 136A, JBL 136H, JBL 2215, JBL 2215A, JBL 2215B, JBL 2231, JBL 2231A, JBL 2231H, JBL 2234, JBL 2234A, JBL 2234H, JBL 2235, JBL 2235H, JBL B360, JBL L45A, JBL L45B, JBL L71, JBL L71A, JBL L200B, JBL L220, JBL L300, JBL L300A, JBL LE15, JBL LE15A, JBL PR15, JBL PR15C, JBL S51, JBL S61K, JBL S61P, JBL S507, JBL S508, JBL S607, JBL S608, JBL B360, JBL D44000WX, JBL D44000WXA, JBL S61K, JBL S61P, JBL S507, JBL S508, JBL S607, JBL S608, JBL 4320, JBL 4330, JBL 4331, JBL 4331A, JBL 4331B, JBL 4332, JBL 4333, JBL 4333A, JBL 4333B, JBL 4340, JBL 4343, JBL 4343B, JBL 4344, JBL 4350, JBL 4350A, JBL 4350B, JBL 4355, JBL 4430, JBL 4435 FOAM: OD 14.437″ (366.70 mm) – ID 12.063″ (306.375 mm) ROLL: OD 13.375″ (349.250 mm) – ID 12.938″ (328.625 mm)
|
||||
| 15" JL Audio Refoam Kit Flat- RFK15JL FLAT |
|
$ 25.00 | ||
|
RFK15JL FLAT Flat Attach Foam- JL Audio Style - reuse original dustcap if possible FOAM: OD 14.375″ (365.125 mm) – ID 11.313″ (287.35 mm) ROLL: OD 13.688″ (347.675 mm) – ID 11.75″ (298.40 mm)
|
||||
| 15" Radio Shack Realistic Mach-1 Refoam Kit-Angle -RFK15 MACH also 15" Velodyne w/ accelerometer |
|
$ 35.00 | ||
|
RFK15 MACH Angle Attach Foam- Radio Shack Mach 1 - Perfect for Velodyne 15″ woofer with accelerometer FOAM: OD 14.5″ (368.30 mm) – ID 10.75″ (273.050 mm) ROLL: OD 13.813″ (350.850 mm) – ID 12.188″ (309.575 mm)
|
||||
| 15" Refoam Kit Angle- RFK15 ANGLE |
|
$ 22.00 | ||
|
RFK15 ANGLE Angle Attach Foam FOAM: OD 14.50″ (368.30 mm) – ID 11.31″ (282.70 mm) ROLL: OD 13.875″ (352.425 mm) – ID 12.188″ (309.575 mm)
|
||||
| 15" Refoam Kit Flat Attach- RFK15 FLAT |
|
$ 22.00 | ||
|
RFK15 FLAT Flat Attach Foam FOAM: OD 14.50″ (368.30 mm) – ID 11.75″ (298.450 mm) ROLL: OD 13.562″ (344.474 mm) – ID 12.188″ (309.575 mm)
|
||||
| 15" Rockford Fosgate Refoam Kit Peel- RFK15 RF |
|
$ 52.00 | ||
|
RFK15 RF Angle Attach FOAM- Rockford Fosgate Style - Check your measurements. DOES NOT FIT ALL Rockfords. This foam is removed from a cone so there is a thin residue of cone on the lip that attaches to your new cone FOAM: OD 14.75″ (347.60 mm) – ID 10.75″ (273.05 mm) ROLL: OD 13.813″ (350.85 mm) – ID 11.125″ (282.575 mm) |
||||
| 15" Tannoy Refoam Kit= RFK15 TANNOY |
|
$ 75.00 | ||
|
RFK15 TANNOY Angle Attach UP Foam Tannoy - Use with Tannoy models HPD 385, Arden MK.1, Mansfield 15, Monitor Royal 15, Amesbury, 7900 0008, Arden MK 1, Berkeley MK 1, and others as well. FOAM: OD 14.25″ (361.95 mm) – ID 10.812″ (274.625 mm) ROLL: OD 13.188″ (334.975 mm) – ID 11.562″ (293.674 mm)
|
||||
| 18" JBL 2245 Refoam Kit- RFK2245 |
|
$ 40.00 | ||
|
RFK2245 Angle Attach Foam- Perrfect for JBL models JBL 2245, JBL 2245H, JBL 2245J, JBL B460 JBL 4345 FOAM: OD 16.937″ (430.20 mm) – ID 14.75″ (374.65 mm) ROLL: OD 16.75″ (425.450 mm) – ID 15.813″ (401.650 mm)
|
||||
| 18" JL Refoam Kit- RFK18 JL - wide roll |
|
$ 75.00 | ||
|
RFK18 JL Flat Attach Foam- JL Audio Style 18″ FOAM: OD 17.25″ (438.150 mm) – ID 13.75″ (342.90 mm) ROLL: OD 16.438″ (417.525 mm) – ID 14.125″ (358.775 mm)
|
||||
| 3.25" Refoam Kit- RFK3.25 |
|
$ 16.00 | ||
|
RFK3.25 3.25″ Refoam Kit – perfect for RS4000, RS5000 mids and any other models using 902-4144 or 902-2652 FOAM: OD 3.25: (82.550 mm) – ID 2.23″ (56.640 mm) ROLL: OD 2.562″ (65.074 mm)- ID 2.438 (61.925 mm) |
||||
| 3.875" Refoam Kit Flat- RFK3.875 FLAT |
|
$ 16.00 | ||
|
RFK3.875 Flat Flat Attach Foam FOAM: OD 3.875″ (98.425 mm) – ID 2.625″ (66.675 mm) ROLL: OD 3.562″ (90.474 mm) – ID 2.813″ (71.45 mm) |
||||
| 4.25" Refoam Kit Angle- single foam roll- RFK4.25 |
|
$ 16.00 | ||
|
RFK4.25 SINGLE ROLL- can be used roll up or roll down FOAM: OD 4.25″ (107.95 mm) – ID 2.6″ (66.24 mm) ROLL: OD 3.625″ (92.075 mm) – 2.875″ (73.025 mm)
|
||||
| 4.5" Bose "m" roll Refoam Kit - RFK4.5m |
|
$ 16.00 | ||
|
RFK4.5M (NOT JUST FOR BOSE BRAND) Bose double roll=two narrow rolls similar to the top of the letter “m” in one foam FOAM: OD 4.28″ (108.712 mm) – ID 2.875″ (73.025 mm) ROLL: OD 3.938″ (100.025 mm) – ID 2.938″ (74.625 mm)
|
||||
| 4.5" Refoam Kit Angle- single foam roll- RFK4.5 S |
|
$ 16.00 | ||
|
RFK4.5S Angle Attach- Normal single roll (as opposed to double roll in RFK4.5 m) FOAM: OD 4.50″ (114.30 mm) – ID 3.200″ (81.28 mm) ROLL: OD 4.188″ (106.375 mm) – ID 3.438″ (87.325 mm)
|
||||
| 5" Refoam kit "m" Roll Angle- RFK5 |
|
$ 16.00 | ||
|
RFK5 double roll similar to top of letter “m” in one foam surround FOAM: OD 4.75″ (120.65 mm) – ID 3.2″ (81.28 mm) ROLL: OD 81.28″ (107.950 mm) – ID 3.43″ (87.325 mm)
|
||||
| 5.25" Refoam Kit Angle- RFK5.25 ANGLE |
|
$ 16.00 | ||
|
RFK5.25 Angle Perfect for many Infinity model midranges and woofers. measure your original foam to see if it matches these specs FOAM: OD 5.1″ (129.54 mm) – ID 3.51″ (89.154 mm) ROLL: OD 4.688″ (119.075 mm) – ID 3.875″ (98.425 mm)
|
||||
| 5x7" Refoam Kit- RFK5X7 |
|
$ 16.00 | ||
|
RFK5x7 Angle Attach FOAM: OD 5.375 X 7.688″ (136.525 X 195.275 mm) – ID 5.562 X 3.438″ ( 141.275 X 87.325 mm) ROLL: OD 4.438 X 7.063″ (112.725 X 179.4 mm) – ID 4.125 X 6.313″ (104.725 X 160.35 mm)
|
||||
| 6" Refoam Kit Angle Small ID- RFK6 ANGLE SM |
|
$ 16.00 | ||
|
RFK6 ANGLE SM FOAM: OD 6″ (152.40 mm) – ID 4.0″ (101.60 mm) ROLL: OD 5.313″ (134.95 mm) – ID 4.313″ (109.55 mm) |
||||
| 6" Refoam Kit Angle XS- RFK6 ANGLE XS |
|
$ 18.00 | ||
|
RFK6 ANGEL XS Extra Small ID, Angle Attach FOAM: OD 5.813″ (147.650 mm) – ID 3.813″ (96.850 mm) ROLL: OD 5.25″ (133.350 mm) – ID 4.188″ (106.375 mm)
|
||||
| 6" Refoam Kit m Roll - RFK6 m ROLL |
|
$ 20.00 | ||
|
RFK6 M ROLL Strait Attach - double roll in one foam. looks like top of the letter ”m”. Strait attach FOAM: OD 7.313″ (185.750 mm) – ID 5.063″ (128.600 mm) ROLL: OD 6.250 ” (158.750 mm) |
||||
| 6" Refoam Kit Strait- RFK6 BOSTON |
|
$ 16.00 | ||
|
RFK6 BOSTON Foam with Straight Attach. Roll continues to inside edge of foam without seam. FOAM: OD 5.969″ (151.612 mm) – ID 4.313″ (109.550 mm) ROLL: OD 5.50″ (139.70 mm) |
||||
| 6"- 6.5" Refoam Kit Angle- RFK6 ANGLE |
|
$ 16.00 | ||
|
RFK6 ANGLE This foam fits most 6″ Infinity models including 902-2715, 902-4158, 902-4338, 902-5794, 902-6133, 902-6313, 902-6354, 902-6778 and many other brands. FOAM: OD 5.95″ (151.13 mm) – ID 4.2″ (106.68 mm) ROLL: OD 5.5″ (139.70 mm) – ID 4.5″ (114.30 mm)
|
||||
| 6x9" Refoam Kit Angle- RFK6X9 ANGLE |
|
$ 16.00 | ||
|
RFK6X9 ANGLE FOAM: OD 6.313 X 8.938″ (160.35 X 227.025 mm) – ID 7.063 X 4.375″ (179.40 X 111.125 mm) ROLL: OD 5.688 X 8.313″ (144.475 X 211.150 mm) – ID 144.475 X 211.15″ (115.874 X 185.75 mm)
|
||||
| 6x9" Refoam Kit Flat- RFK6X9 FLAT |
|
$ 16.00 | ||
|
RFK6X9 FLAT Flat Attach FOAM: OD 6.25 X 8.938″ (158.75 X 227.025 mm) – ID 7.125 X 4.375″ (180.975 X 111.125 mm) ROLL OD: 5.813 X 8.438″ (123.825 X 192.074 mm) – ID 4.875 X 7.562″ (123.825 X 214.325 mm)
|
||||
| 8" CV Refoam Kit Red Flangle- RFK8 RED |
|
$ 16.00 | ||
|
RFK8 RED Flatish Angle attach. Foam is red on top and bottom (unlike RFK12 Red which is red on top and gray on bottom) Perfect for many Cerwin Vega 8″ woofers FOAM: OD 7.75″ (196.85 mm) – ID 5.375″ (136.525 mm) ROLL: OD 7.188″ (182.575 mm) – ID 5.75″ (146.05 mm)
|
||||
| 8" FOAM STRAIGHT- RFK8 STRAIT |
|
$ 16.00 | ||
|
RFK8 STRAIT Foam with Straight Attach. Roll continues to inside edge of foam without seam. FOAM: OD 7.813″ (198.45 mm) – ID 5.562″ (141.274 mm) ROLL: OD 7.188″ (182.575 mm) |
||||
| 8" JBL LE8 Refoam Kit - RFKLE8 |
|
$ 16.00 | ||
|
RFKLE8 Flatish Angle Attach Pefect for 8″ woofers in the models listed below. FOAM: OD 6.25″ (168.275 mm) – ID 5.188″ (131.775 mm) ROLL: OD 6.25″ (157.75 mm) – ID 5.5″ (139.70 mm) JBL 112, JBL 112A, JBL 112H, JBL LE8, JBL LE8T, JBL L33, JBL L44, JBL L54, JBL L59, JBL L75, JBL L80, JBL 2115, JBL 2115A, JBL 2115H, JBL 2115J, JBL 108, JBL 2108A, JBL 2108H, JBL 2108J, JBL PR8 Passive, JBL 4315B MID to name a few |
||||
| 8" JBL116 Refoam Kit- RFK8 JBL 116 |
|
$ 16.00 | ||
|
RFK8 JBL116 Angle Attach Perfect for JBL 8″ woofer model 116 found in these cabinets and these other woofer models listed below. FOAM: OD 7.75″ (196.85 mm) – ID 5.25″ (133.35 mm) ROLL: OD 7.125″ (180.975 mm) – ID 5.75″ (146.05 mm) JBL 65R-HSA, JBL 116, JBL 116A, JBL 116H, JBL 116H-1, JBL 116H-2, JBL 116H-3, JBL 117, JBL 117A, JBL 117H, JBL 117H-1, JBL 308G1, JBL 308G2, JBL 308G3, JBL 308G4, JBL 408, JBL 408G, JBL 408G1, JBL 4301, JBL 4301B, JBL 4301BE, JBL 4301 E, JBL 4408, JBL 508G, JBL 508G-1, JBL 508G-2, JBL 508G-3, JBL 73284-01, JBL 86160- JBL ZB160, JBL J220, JBL J320, JBL J320A, JBL82, JBL L5, JBL L16, JBL L-19, JBL L19A, JBL L46, JBL L60GI, JBL L60T, JBL L 86, JBL LX44, JBL LX66, JBL LX144, JBL LX166, JBL LX300, JBL LX440, JBL LX500, JBL LXE770, JBL R82, JBL T80, JBL XPL140, JBL XPL140A |
||||
| 8" Refoam Kit "m" ROLL- RFK8 m ROLL |
|
$ 26.00 | ||
|
RFK8 m ROLL Flangle (flatish/angle) Attach - double roll in one foam. looks like top of the letter ”m”. Perfect for Toyota JBL 86160 speaker FOAM: OD 7.875″ (200.02 mm) – ID 5.562″ (141.270 mm) ROLL: OD 7.375″ (187.325 mm) – ID 6.125″ (155.575 mm)
|
||||
| 8" Refoam Kit Angle- RFK8 ANGLE |
|
$ 16.00 | ||
|
RFK8 ANGLE Perfect for Bose 301 plus many Infinity 8″ woofers but good for many other brands and models as well. FOAM: OD 7.75″ (196.85 mm) – ID 5.5″ (139.70 mm) ROLL: OD 7.0″ (177.80 mm) – ID 5.625″ (146.05 mm)
|
||||
| 8" Refoam Kit Dynaudio - PolyFOAM - RFK8DYNA |
|
$ 30.00 | ||
|
RFK8DYNA 8″ PolyFoam Angle Attach Dynaudio surround for 21w and 24w series 21W54, 24W75, 24W100, 21W-5406. There are no Dynaudio sized butyl surrounds available. FOAM: OD 7.938″ (201.625 mm) – ID 5.625″ (142.875 mm) ROLL: OD 7.625″ (193.675 mm) – ID 5.875 (149.225 mm)
|
||||
| 8" Refoam Kit Flat- RFK8 FLAT |
|
$ 16.00 | ||
|
RFK8 FLAT Attach FOAM: OD 7.312″ (185.725 mm) – ID 5.375″ (136.525 mm) ROLL: OD 6.38″ (176.225 mm) – ID 5.75″ (146.05 mm)
|
||||
| 8" Rockford Refoam Kit- RFK8 ROCKFORD |
|
$ 32.00 | ||
|
RFK8 ROCKFORD This Angle Attach Foam is .80″ (20.32mm) wider than a “standard” foam. Reuse original dustcap if possible FOAM: OD 7.5″ (190.5 mm) – ID 5.0″ (127.0 mm) ROLL: OD 7.188″ (182.575 mm) – ID 5.125″ (130.175 mm)
|
||||
| 9" Refoam Kit "m" ROLL- RFK9 m ROLL |
|
$ 32.00 | ||
|
RFK9 M ROLL Flatish Angle Attach -double roll in one foam. looks like top of the letter ”m” Perfect for Toyota, Cadillac, Lexus, Mark Levinson speaker FOAM: OD 8.813″ (223.850 mm) – ID 6.125″ (155.575 mm) ROLL: OD 8.063″ (204.80 mm) – ID 6.5″ (165.10 mm) |
||||
| Bose 802 or 901 Refoam Kits- 20 pcs- RFK901 |
|
$ 40.00 | ||
|
RFK901 20 foams – enough foams for two cabinets plus 2-4 spares (2 spares for 901 and 4 spares for 802) with 3 one oz tubes of contact glue Fits 801, 802 and 901 (This foam is RFK4.5 m Roll Flat on the Spec Sheet) FOAM: OD 4.28″ (108.712 mm) – ID 2.875″ (73.025 mm) ROLL: OD 3.938″ (100.025 mm) – ID 2.938″ (74.625 mm)
|
||||
| Kef Donut Center Ring |
|
$ 10.00 | ||
|
DONUT Kef center foam ring sold individually (one) used with, but not limited to many Kef 8″ and 10″ model 107 woofers FOAM: OD 2.75″ (69.850 mm) – ID .813″ (20.650 mm) ROLL: OD 2.5″ (63.50 mm) – ID 1.125″ (28.575 mm)
|
||||
| RFK10 BOSTON |
|
$ 22.00 | ||
|
RFK10 Boston Foam with Straight Attach. Roll continues to inside edge of foam without seam. FOAM: OD 9.75″ (247.65 mm) – ID 7.125″ (180.975 mm) ROLL: OD 9.063″ (230.200 mm) Not the right foam for all 10″ Boston Acoustic woofers. This works for the polycone, square frame similar to picture. Most other 10″ Boston woofers use the RFK10 Angle Pictures show a 3.125″ polyprop dustcap. They come plain or with the Boston logo while supplies last. Or, you can order a screen, paper or felt dustcap. |
||||
Updating...
Prices Subject to Change
